Lennox Air Duct Cleaning in Alameda, CA

Lennox Air Duct Cleaning in Alameda, CA

Lennox air duct cleaning in Alameda runs $450 – $890 for a full system, and we’re the only independent shop on the island that cleans, seals, and repairs the ductwork tied to your Lennox equipment in one visit. Alameda’s damp, salt-laden air does things to Lennox systems that inland contractors rarely recognize. Call (833) 620-5944 for a straight answer on what’s in your ducts.

Call (833) 620-5944

We’ve worked on Lennox furnaces and air handlers in Alameda for nine years – from 1920s Craftsman bungalows on the East End to mid-century ranches near Bay Farm. We handle full-system cleaning, duct sealing, and evaporator coil cleaning on Lennox Merit, Elite, and Signature Collection equipment, and we also offer our Air Duct Cleaning in Alameda. Independent service means we answer to you, not a manufacturer’s playbook.

Why Alameda Residents Choose Us for Lennox Service

Bruce Lowry, our owner, grew up in Alameda’s West End a few blocks from Crab Cove. He’s spent the better part of twenty years crawling through Bay Area ductwork, and he built Everclear around a simple idea: you either cleaned the system or you didn’t, and the dust didn’t lie. That’s why every job ends with before-and-after photos of your own ducts.

We run Rotobrush rotary brush systems and Nikro HEPA-rated vacuums – the same equipment used in commercial remediation work, brought into Alameda’s older homes. We stock Lennox-specific components, so a rusted drain pan or a corroded return plenum doesn’t leave you waiting on a backordered part. When your Lennox air handler is pulling damp crawlspace air through a floor joist bay return, we know exactly what that looks like and how to fix it. See Lennox sales & service for the full scope of what we cover.

Common Lennox Air Duct Cleaning Problems We Solve in Alameda

• Rusted condensate and corroded evaporator coils. Alameda’s marine fog keeps crawlspace humidity high year-round, so Lennox evaporator coils and drain pans rust faster than they would in Oakland or Walnut Creek. We clean the coil fins and flush the pan, then check the condensate line so it drains instead of pooling.
• Deteriorated flex duct on crawlspace retrofits. Older Alameda homes often had flex duct added later, routed through damp pier-and-beam crawlspaces. The inner liner sags, the insulation wets out, and the whole run leaks. We replace what’s failed and seal what’s salvageable.
• Corroded galvanized return plenums and joist-bay returns. Salt-laden bay air eats galvanized metal. In Alameda’s Victorians and Craftsmans, the return path is often a floor joist bay, and that bay is open to the crawlspace. We seal it or line it so your Lennox system isn’t breathing crawlspace air.
• Blower motor and wheel fouling from salt-air corrosion. Moisture and salt settle on blower wheels, throwing them out of balance and cutting airflow. On Lennox variable-speed air handlers this shows up as noisy operation and reduced efficiency. We pull the blower assembly, clean the wheel, and check the motor.
• Musty odors from damp duct insulation. When flex duct insulation stays wet in an Alameda crawlspace, it grows mold and the whole house smells like a wet basement every time the Lennox system cycles. Cleaning alone won’t fix that – the wet insulation has to come out.

Lennox Service in Alameda: What Local Conditions Mean for Your Equipment

Alameda sits just above sea level, and the water table under the island’s old pier-and-beam Victorians keeps crawlspaces damp even in August. That’s the detail that separates Lennox in Embarcadero or here in Alameda from a job in, say, Daly City. We routinely find puddled or soggy duct runs and rusted hard pipe where an inland contractor expects dry dust. On a recent job in Alameda’s East End, we inspected a 1920s Craftsman with a Lennox Merit Series furnace and found the return duct – actually a floor joist bay – was pulling damp crawlspace air into the system, leaving rust streaks on the heat exchanger. We sealed the joist bay with mastic, rerouted a flex run that was sagging into a puddle, and cleaned the evaporator coil. The homeowner noticed better airflow and less musty odor the same day.

If you own a Lennox system in Alameda, your ductwork is fighting moisture and salt, not just household dust. Cleaning alone won’t win that fight. That’s why we push duct sealing and coil care on nearly every older Lennox install we service on the island.

Lennox Models & Products We Service in Alameda

We service Lennox Merit Series furnaces and air handlers, Lennox Elite Series variable-speed air handlers, Lennox Signature Collection high-efficiency systems, and Lennox Healthy Climate ducted products. When your system needs a control board or blower motor, we use OEM Lennox parts. For duct fittings, sealants, and flex runs, we use high-quality aftermarket components that match or exceed spec. For older Lennox systems in Alameda with corroded ductwork, we generally recommend targeted repair over full replacement – unless the heat exchanger or coil is compromised, there’s no reason to gut a system that still has years left. We service all of Alameda service area, including the island’s oldest housing stock.

Lennox Service Pricing in Alameda

FAQs – Lennox Air Duct Cleaning in Alameda

Service Areas Near Alameda

We’re based on the island and work throughout Alameda, including Bay Farm, the East End, the West End, and Gold Coast. We also provide Lennox service in Berkeley for pier-and-beam homes in the flatlands and hills, plus Lennox service in San Mateo and surrounding Peninsula cities. Richmond and Walnut Creek rounds out our East Bay coverage for Lennox ductwork.

Book Your Lennox Service in Alameda Today

If your Lennox system has been running in Alameda humidity without proper duct care, call (833) 620-5944 for a free estimate. We’ll show you photos of your ducts before we clean them and after we’re done. Clean air isn’t a feeling. It’s something you can see.

Written by Bruce Lowry, Owner at Everclear Air Duct Cleaning, serving Alameda since 2017.