Dryer vent cleaning
Whole-home duct cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Trusted Dryer Vent Cleaning for Alameda Homeowners
A clogged dryer vent isn’t a minor annoyance. It’s the leading cause of appliance-related house fires in the United States, and in Alameda’s older housing stock where vents often run long, narrow paths from laundry rooms to exterior walls, the risk compounds quickly. Everclear Air Duct Cleaning brings professional-grade Rotobrush rotary brush systems and Nikro HEPA-rated vacuum equipment to every dryer vent job. We show you what came out of your vent before we leave. Call (833) 620-5944 for a free estimate and see the difference for yourself.
Dryer Vent Cleaning Service
A Dryer Vent Cleaning Service removes the lint, dust, and debris that builds up inside the metal ductwork running from your dryer to the outside of your home. In Alameda, where laundry rooms are often tucked into garages or interior closets, vent runs of 15 to 30 feet are common, and longer runs mean more surface area for lint to accumulate. Everclear Air Duct Cleaning uses rotary brush systems to scrub the full interior wall of the vent, then HEPA-filtered vacuums pull the dislodged material out without redistributing it through your living space.
Whole-system cleaning, not just the first few feet
Cut-rate services often clean only the visible portion of the vent behind the dryer. We clean from the inside out, running the brush through the entire duct run to the exterior termination point. Lint hides at elbows, sagging sections, and where the vent meets the wall cap.
Verifiable results on every job
Before-and-after photos of the vent interior are part of every cleaning. You’ll see the obstruction before we start and the clear passage when we’re done. That’s the Everclear standard: verifiable results, not a receipt and a handshake.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Dryer Vent Installation
Dryer Vent Installation involves running new ductwork from your dryer to an exterior wall, replacing old, damaged, or improperly configured venting. In Alameda, many homes built before the 1990s still have flexible foil or plastic vent pipes, which trap lint at every ridge and are now prohibited by California building code. Everclear Air Duct Cleaning installs rigid metal ductwork that meets current fire-safety standards and maximizes airflow.
When old venting needs to go
If your dryer sits against an exterior wall but takes two or three cycles to dry a load, the vent run is often the problem. Crushed, sagging, or oversized ductwork slows air movement and creates lint traps. Replacement is usually a one-day job, and the difference in dry time is immediate.
Proper termination and sealing matter
We install exterior vent caps with backdraft dampers that keep Alameda’s bay winds from pushing cold air back into your laundry room. Every joint gets sealed so the system runs as one continuous path. No air leaks into wall cavities, no condensation collecting behind drywall.
Dryer Vent Repair
Dryer Vent Repair addresses specific failures in an existing vent system: disconnected joints, crushed sections, damaged wall caps, or ducts that have separated inside walls or attics. A disconnected vent doesn’t just waste energy; it’s pumping warm, lint-laden air directly into your home’s structure, where it can feed mold growth and attract pests. Everclear Air Duct Cleaning repairs the compromised section and tests the full system for proper airflow before calling the job done.
Common Alameda failure points
Older homes with raised foundations often run vents through crawlspaces, where moisture and rodents take a toll. We find chewed flex ducts and rusted rigid pipe in these spaces regularly. Repair gets the system back to code and keeps pests out of the exhaust path.
Airflow testing after every repair
A visual fix isn’t enough. We use airflow measurement to confirm the vent is moving air at the rate your dryer needs. That means shorter dry cycles and less lint staying behind. If the repair doesn’t restore proper flow, we keep working until it does.
Dryer Vent Cleaning Company
Choosing a Dryer Vent Cleaning Company means deciding who you’ll trust inside your home and inside your walls. Everclear Air Duct Cleaning isn’t a general handyman service that added vent cleaning to a list of tasks. We’re a full-system air specialist with the commercial-grade equipment that professional duct cleaners nationwide use: Rotobrush rotary brush systems and Nikro HEPA-rated vacuums. That equipment choice matters because it’s the difference between scrubbing the vent wall and just vacuuming what’s easy to reach.
Why equipment matters more than price
A shop vac taped to a drill brush cannot reach the full length of a 20-foot vent run. A rotary brush system can. When a company invests in the right tools, they’re investing in the outcome, not just the booking. We bring the same systems used in commercial and remediation-grade projects to every single-family home in Alameda.
One company, the whole air system
Your dryer vent shares wall cavities with your HVAC ducts. If one is clogged with lint, the other probably isn’t great either. Everclear handles air duct cleaning, dryer vent cleaning, and air duct repair under one roof. No handoff between contractors, no gap in responsibility. Our home page lays out the full scope of what we do.
Dryer Vent Inspection
A Dryer Vent Inspection is a diagnostic look at the entire vent system: the duct run, all connection points, the exterior termination, and the dryer’s exhaust output. It answers one question: is this system safe and efficient right now? In Alameda, we recommend an inspection whenever you buy a home, after any renovation that moves or encloses the laundry area, or if you’ve lived in the house five years without vent cleaning. Everclear Air Duct Cleaning performs inspections using the same camera and airflow tools we use on full cleanings.
What the camera sees
A small inspection camera reveals what the eye can’t: lint packed behind an elbow, a separated joint hidden in a wall chase, or a bird’s nest blocking the exterior cap. You see the images on our screen. No vague descriptions of “some buildup” without proof.
Inspection vs. cleaning: know the difference
An inspection checks condition; a cleaning restores it. Most Alameda homes need both. We recommend starting with an inspection if you’re unsure when the vent was last cleaned, so you know exactly what you’re paying to fix. We also handle Dryer Vent Cleaning in Berkeley for clients across the Bay, including those who want an inspection before they commit to a cleaning.
Commercial Dryer Vent Cleaning
Commercial Dryer Vent Cleaning serves multi-unit buildings, laundromats, salons, gyms, and any property where dryers run constantly and lint volume is high. In Alameda, apartment buildings along Park Street and Central Avenue often have shared laundry rooms with four or more gas dryers exhausting through a common vent stack. That’s a fire hazard that multiplies with every unit added. Everclear Air Duct Cleaning brings commercial-scale equipment and experience to these jobs, with Abatement Technologies containment solutions when the work area requires it.
NFPA 96 and multi-unit compliance
Property managers answer to fire marshals and insurance carriers. A documented commercial dryer vent cleaning program is often a condition of coverage. We provide the verification your inspectors want: before-and-after documentation, airflow readings, and a clear service record for every vent line on the property.
Minimizing disruption to tenants
We schedule commercial work around laundry room demand and work efficiently to keep units operational. The process is contained, quiet relative to the scale of the job, and clean. Your tenants keep doing laundry; you keep your fire-safety documentation current. Our Dryer Vent Cleaning in San Mateo service handles commercial properties across the Peninsula as well.
Brands We Service
We service dryer vent systems connected to every major dryer brand on the market. Whether your laundry room has a Whirlpool, LG, Samsung, Maytag, GE, or Electrolux dryer, the vent system is what we’re there to clean, and it works the same way regardless of the dryer’s badge. What changes is the dryer’s exhaust output, which affects how much lint your vent collects between cleanings.
We’re also familiar with the air-quality and ductwork products from Honeywell, Aprilaire, and Abatement Technologies, which we stock and install for customers who want filtration and containment improvements alongside their cleaning. Whether you have a conventional single-family vent run or a multi-unit commercial stack, we can assess it, clean it, and show you the result. No brand is off the table.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- The dryer takes two or three cycles to dry one load. Long dry times mean airflow is restricted. The dryer is working harder and hotter than it should, and that extra heat is exactly what ignites accumulated lint.
- The laundry room feels hot and humid while the dryer runs. Warm, moist air should be leaving through the vent. When it stays in the room, the vent is partially or fully blocked, and you’re also inviting mold growth in the wall cavity.
- There’s a burning smell when the dryer is on. That’s lint smoldering somewhere in the system. Turn the dryer off, unplug it if you can, and call a professional before running another load.
- The exterior vent flap doesn’t open when the dryer runs. Walk outside and look at the termination point. No flap movement means no exhaust leaving the house. The blockage is somewhere between the dryer and the wall, and every load makes it worse.
- It’s been more than a year since the last cleaning. Most Alameda households need dryer vent cleaning every 12 to 18 months. If you can’t remember the last one, you’re overdue. Schedule it now, before the system tells you with a symptom you don’t want to see.
Our Process, Step by Step
- 1
Inspection and measurement. We start by tracing the full vent run from appliance to exterior termination, measuring length, noting bends, and checking for existing damage. The camera goes in before anything gets cleaned, so we know what we’re working with.
- 2
System protection. Drop cloths go down around the dryer, and if needed, Abatement Technologies containment equipment gets set up to keep dislodged debris from entering living spaces. Your home stays clean, regardless of what comes out of the vent.
- 3
Rotary brush cleaning. The Rotobrush system spins through the entire duct run, scrubbing lint off the interior wall from the dryer connection to the exterior cap. This is mechanical contact cleaning, not just air pressure.
- 4
HEPA vacuum extraction. A Nikro HEPA-rated vacuum runs simultaneously, pulling everything the brush dislodges out of the system under negative pressure. Nothing gets redistributed into your home’s air.
- 5
Verification and walkthrough. We run the camera again, show you the before-and-after images side by side, and confirm airflow at the exterior termination. You see the clearance. Then we pack up and your dryer goes back where it belongs.
How Much Does Dryer Vent Cleaning Cost in Alameda?
The biggest factor is vent length and access. A 6-foot straight run to an exterior wall is quick work. A 30-foot run with three elbows through a crawlspace takes longer and requires more equipment setup. What should not affect the price is bait-and-switch tactics. Some companies advertise a low flat rate, then charge per vent section, per elbow, or per foot once the tech arrives. We give one flat price per system, agreed before work starts.
Beware the $49 dryer vent cleaning coupon. If the price seems too low to pay for a technician, insurance, and real equipment, it’s a loss leader designed to upsell you hard once the van is in the driveway. You end up paying more than our honest quote, and you still don’t get before-and-after photos. A free estimate with a real price is the only way to compare fairly, and that’s what we give you when you call (833) 620-5944.
Our Service Area Near Alameda
We serve Alameda and the surrounding East Bay, including Oakland, Berkeley, San Leandro, Hayward, Richmond, and Walnut Creek. We also work across the Bay in San Mateo, Daly City, South San Francisco, Burlingame, and Albany. If you’re in a neighborhood like Alameda’s Gold Coast, East End, or Bay Farm Island, we’re familiar with the housing stock and the vent configurations common in each area. If you’re not sure whether we cover your location, call us. If it’s within reasonable range, we’ll make it work. And if you’re exploring the East Bay side of things, our Dryer Vent Cleaning in Alameda page covers the full service area detail.
Serving Alameda, CA – Our Local Coverage Area
We’re based in the Alameda area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Dryer Vent Cleaning in Alameda
What is dryer vent cleaning?
Dryer vent cleaning is the physical removal of lint, dust, and debris from the duct that carries dryer exhaust from your laundry room to the outdoors. A rotary brush scrubs the interior walls of the vent while a HEPA vacuum extracts the dislodged material. The goal is to restore full airflow and eliminate a fire hazard.
How long does dryer vent cleaning take?
Most residential jobs in Alameda take 45 to 90 minutes from start to finish. Straight, accessible vent runs are faster; long runs through crawlspaces or roofs take longer. Commercial properties are scheduled independently based on the number of lines and building access. Call (833) 620-5944 for an estimate based on your home’s specific layout.
How much does dryer vent cleaning cost in Alameda?
Most Alameda homes pay $130 to $250 for a full dryer vent cleaning. Vent runs over 20 feet, roof terminations, and heavy buildup can push the price toward $300. We give one flat price per system before work starts, with no per-vent or per-foot charges added later.
Do you service all dryer brands?
Yes. We work with Whirlpool, LG, Samsung, Maytag, GE, Electrolux, and every other major brand. The vent system is what we clean, and it connects to all of them the same way. The dryer’s brand doesn’t change the cleaning process or the equipment we use.
Do you offer emergency dryer vent services?
We do not offer emergency or same-day dispatch. Dryer vent cleaning is a scheduled service, and we book it as such. If you’re seeing smoke or flames from your dryer, call 911 first. For non-emergency concerns, call us to schedule the soonest available appointment.
Is there a warranty on the work?
Our workmanship is built on showing you the result before we leave. If airflow issues return shortly after a cleaning due to something we missed, call us and we’ll make it right. We don’t hide behind fine print, and we stand behind the quality of every cleaning.
How do I prepare for a dryer vent cleaning appointment?
Pull the dryer away from the wall if you’re able, and clear a path to the laundry room. That’s all. We bring the equipment, the protection, and the process. If you can’t move the dryer, don’t worry; we handle that too when we arrive. Call (833) 620-5944 if you have questions about your specific setup.
Schedule Your Dryer Vent Cleaning Service in Alameda Today
A clogged dryer vent doesn’t fix itself, and every load you run makes the hazard worse. Call (833) 620-5944 to schedule your no-obligation estimate. We’ll walk you through the process, give you an honest price for your home’s specific vent configuration, and show you the results when the job is done. That’s the Everclear standard: clean, verified, and done right.
Written by Bruce Lowry, Owner at Everclear Air Duct Cleaning, serving Alameda and the greater Bay Area.