Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Trane Air Duct Cleaning in Albany, CA
Trane air duct cleaning in Albany runs $450 to $1,200 for a full system, depending on how many returns and how bad the build-up is. We’re an independent shop, not authorized or partnered with Trane, but we work on their XR heat pumps, XB furnaces, and older air handlers every week across Albany. The difference here is simple: we scope the ducts before we clean them, so you see what’s actually in there and what came out. Call (833) 620-5944 for a free estimate.
Why Albany Residents Choose Us for Trane Service
Bruce Lowry, our owner, grew up in Alameda’s West End and spent two decades working through Bay Area ductwork, including Embarcadero properties, before starting Everclear. He learned early that air quality work is honest in a way most trades aren’t: you either cleaned the system or you didn’t, and the dust doesn’t lie. That’s the standard we bring to every Trane system we service in Albany.
Trane makes solid equipment. The XR14 and XR16 heat pumps hold up well, and the XB80 and XB90 furnaces are workhorses. But the equipment is only as good as the ductwork attached to it. In Albany, where most homes are 1910s to 1940s bungalows that had central heat added decades after they were built, the ducts are often the weak point. We know Trane systems and we know Albany retrofits. That combination means we find problems other companies miss. We also use professional-grade Rotobrush rotary brush systems and Nikro HEPA-rated vacuum equipment, the same tools used in commercial jobs, so the cleaning itself is verifiable. Clean air isn’t a feeling. It’s something you can see.
We’re a full-system shop. Air duct cleaning, dryer vent cleaning, and air duct repair all under one roof. If we find a leaky plenum or a disconnected joint while scoping your Trane system, we can seal it right then instead of handing you a referral to someone else. And we stock Honeywell and Aprilaire filtration products, so if your Trane system needs better air quality, we can handle that in the same visit. See our full Trane sales & service coverage for more on how we approach the equipment side.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Common Trane Air Duct Cleaning Problems We Solve in Albany
- Loose plenum and trunk connections at the air handler. Albany’s original 1920s built-ins often hide these joints. When a Trane air handler is retrofitted into what was once a pantry or closet, the supply runs rarely line up cleanly. We find disconnected or poorly sealed joints behind original cabinetry that a standard cleaning never touches.
- Damp, caked evaporator coils and blower wheels. Albany’s fog-influenced microclimate means cool, damp air sits in crawlspaces most of the year. Trane equipment mounted low picks up that moisture, and coils and blower wheels collect a wet, mildewed paste that kills airflow and drives up static pressure. This is a fog-belt problem, not a dust problem.
- Failed duct tape and degraded insulated wrap. Older Albany homes sometimes still have asbestos-era duct tape or brittle wrap on Trane flex and metal runs in crawlspaces. That material needs careful handling, not a quick tear-out. We identify it during scope, not after we’ve disturbed it.
- Return-side leaks pulling crawlspace air. Disconnected return joints draw damp, musty crawlspace air back into the Trane system. That shows up as stale supply air and short cycling during Albany’s cool stretches. Sealing the return side fixes the smell at the source instead of covering it with a filter.
- Short, oddly routed runs that trap debris. Because Albany’s duct systems were added to homes that predate central HVAC, the runs are often short, crooked, and pinched through floor joists and closets. Debris collects at the bends, and mold shows up first where fog-season humidity condenses inside the duct.
Trane Service in Albany: What Local Conditions Mean for Your Equipment
Here’s what most pages won’t tell you: because Albany’s bungalows often had central heat retrofitted into former closet and pantry spaces, Trane air handlers here are frequently shoehorned into cabinets with short, crooked supply runs. A camera scope almost always finds disconnected joints behind original built-ins that a simple duct cleaning would never reach. This is not a generic maintenance issue. It’s a structural problem baked into Albany’s housing stock. In a recent job on a 1920s Craftsman bungalow off San Pablo Avenue, our tech scoped a Trane XB80 furnace retrofit into a former pantry and found the supply trunk pulled loose from the plenum behind the original built-in. We also offer San Pablo Trane service for similar retrofit challenges in that area. Fog-belt moisture had mildewed the flex, and the return was drawing crawlspace air. We resealed the joints with mastic, cleaned the evaporator coil and blower, and replaced the damaged flex run. The musty supply air cleared within a day. That’s the kind of problem you only find if you look, and you only know to look if you understand how Albany homes were built.
Trane Models & Products We Service in Albany
We service Trane XR14 and XR16 heat pump and air conditioning condensing units, XB80 and XB90 single-stage gas furnaces, XR95 two-stage gas furnaces, and older Trane air handlers and coil cabinets installed in 1990s to 2000s retrofits. For model-specific components like coil assemblies and blower motors, we use OEM Trane parts when they’re available and cost-effective. On the duct side, where the brand doesn’t matter, we use quality aftermarket flex duct, mastic, and sealants. We stock common replacement materials locally so Albany turnaround is usually measured in days, not weeks. And when a Trane coil is failing or a heat exchanger is done, we’ll tell you straight. Sealing and cleaning can restore performance on some older equipment. On others, replacement is the smarter money. We don’t push either way.
See the difference
Before
After
Before
After
Before
AfterTrane Service Pricing in Albany
Full-system Trane air duct cleaning in Albany typically lands between $450 and $1,200. What drives the cost? The number of returns, the condition of the ductwork, how much build-up is actually in there, and whether repairs are needed. Two-story bungalows or homes with multiple return drops cost more than a small single-story cottage. If we find a loose plenum, a disconnected joint, or mildewed flex, the repair adds to the cleaning price, but we quote the whole system as one number before any work starts. No per-vent pricing. No surprise add-ons once the van is in the driveway. Your free estimate includes a camera scope of the ductwork so you see the condition before we quote. Call (833) 620-5944 and we’ll walk you through it.
Serving Albany, CA – Our Local Coverage Area
We’re based in the Albany area and know this community well, and we also provide Trane repair in Richmond. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs – Trane Air Duct Cleaning in Albany
Yes. Those short, tight runs are exactly the systems we specialize in. A camera scope is part of every cleaning in Albany because the retrofits here hide disconnected joints and debris that brushes alone won’t reveal. We clean what’s reachable and we tell you what isn’t, with photos before and after. Call (833) 620-5944 to schedule a scope and quote.
Because the smell isn’t coming from the filter. In Albany’s fog-season humidity, crawlspace-mounted Trane equipment pulls damp air through leaky return joints, and mildew grows on the coil and blower wheel. A filter change won’t touch it. The fix is sealing the return side and cleaning the coil. Call (833) 620-5944 for a free estimate and we’ll scope it first.
Usually yes. Old duct tape dries out, the adhesive fails, and the joints open. Worse, some older Albany homes have asbestos-era tape or wrap that needs careful handling. We don’t tear it out blindly. We identify what we’re dealing with during the scope, then quote sealing or replacement accordingly. Call (833) 620-5944 and we’ll take a look.
Yes. Evaporator coil cleaning and blower wheel cleaning are part of what we do on Trane XR heat pumps and air handlers. In Albany’s damp crawlspace conditions, those components collect mildew and lint that restrict airflow. Cleaning them makes a measurable difference in static pressure and output temperature. Call (833) 620-5944 for a quote that covers the full system.
We do. Older Trane air handlers and coil cabinets from the 1990s and 2000s are common in Albany retrofits, and we service them regularly. We use OEM Trane parts for model-specific components when they’re available and cost-effective. If the equipment is beyond saving, we’ll tell you plainly and let you decide. Call (833) 620-5944 and we’ll scope the system and give you an honest read.
Service Areas Near Albany
We cover Albany and the surrounding East Bay, including Alameda, Berkeley, Richmond, and Walnut Creek. For Trane owners further east, see our Trane service in Lafayette page. If you’re on the Peninsula, we also offer Trane service in Foster City. Check our full Albany service area for exact coverage details.
Book Your Trane Service in Albany Today
If your Trane system hasn’t been scoped and cleaned in years, or if you’ve been burned by a cheap cleaning that left you with no proof the work was done, we’re the shop that shows the before and after. Call (833) 620-5944 for a free estimate. We service Albany and the surrounding East Bay, including Berkeley Trane service.
Written by Bruce Lowry, Owner at Everclear Air Duct Cleaning, serving Albany since 2017.